Doucet Clamping Panels and Doors

SDM,  Stand  Alone 1 section Door Assembly System 30″ x 72″ maximum capacity 5-1/2″ x 12-1/2″ minimum capacity

One fixed vertical clamp, One mobile vertical clamp on roller bearings for effortless positioning. One mobile horizontal clamp with a unique “gas spring” assisted lever for effortless centering, Pressure is distributed with 4″ diameter air cylinders, At 80 psi there is 675 lbs on clamping pressure per clamp Operator’s working height adjustment

Price $ 3,400.00 Quick Ship 4/6 weeks

 

Doucet Single Door Master for Miter Doors & Cope and Stick Doors (90°) is available in two models: SDM-MITER and SDM2-MITER.

The Model SDM-MITER is suitable for assembly of large pantry doors up to 30″ x 72″ down to drawer fronts 5-1/2″ x 12-1/2″. Standard model has four clamps.
The Model SDM2-MITER is suitable for double door assembly up to 30″ x 48″ down to drawer fronts 5-1/2″ x 12-1/2″. Standard model has eight clamps.

$6,600.00 Quick Ship 4/6 weeks.

 

Doucet 5 section Door Master for Miter Doors & Cope and Stick Doors (90°) is available in two models: RDM-MITER and RDM2-MITER.

The Model RDM-MITER is suitable for assembly of large pantry doors up to 30″ x 72″ down to drawer fronts 5-1/2″ x 12-1/2″. Standard model has four clamps per section.
The Model RDM2-MITER is suitable for double door assembly up to 30″ x 48″ down to drawer fronts 5-1/2″ x 12-1/2″. Standard model has eight clamps per section. Call for Quote 214-418-7572:  http://Video

 

MODEL NWR-8

12 – 2 1/2″ x 40″ capacity clamps with “t” handles or butterfly nuts. Choice of rapid change or standard clamps
8 foot self standing rack with 2 floor level horizontal tubes, 2 laser cut vertical beams and 9 transversal tubes
The NWR offers 4 gluing levels when configured as a single sided rack and 8 levels as a dual sided rack

 

 

DOUCET SRM Clamp Carrier widths are 6.5, and 8.5 feet and are available in 6 or 8 section configurations

The carrier is equipped with a front rest, and anti-backup device and is offered with the same clamps as the hydraulically powered unit. Doucet clamps are the sturdiest and the heaviest in the industry. They are made of welded steel channels 2″ X 1″ on both sides, a stationary front jaw and a mobile rear jaw. The clamps slide across the section’s support bracket for an easy adjustment to your panel width.

 

 

Doucet Clamp Carriers, model SRX, are the ideal clamping solution for panels, stair components, rails, posts and architectural millwork.

The Clamp Carrier model SRX includes:

Rotative frame according to the required configuration (see Options tab).
Hydraulic power unit, hydraulic tightening tool with joystick control, and built-in torque control valve mounted on a sliding carriage moving across the front rest of the clamp carrier.
Hydraulic rotation motor and speed reducer with joystick forward/reverse control.
One valve for tightening torque calibration relative to material thickness and center to center spacing on clamps (as per pressure charts); for a perfect control over tightening pressure regardless of panel thickness.
Pneumatically actuated front rest and section support
Panel flattener installed on a sliding carriage with flattering and release commanded by a manual rocking valve, downward force of the panel flattener up to 750 lbs.